FEP/PTFE Dual Shrink Heat Shrinkable Tubing
NOTE - Due to extreme instability in the PTFE market, prices are subject to change without notice. Lead times can be up to 10 weeks.
Features
Continuous operating temperature -454°F to 500°F (-270°C to 260°C)
Outstanding resistance to almost any chemical known (exceptions: alkali metals in molten state, fluorine gas at high temperatures, chlorine trifluoride).
FDA and USP Class VI approved
Very low coefficient of friction
Good dielectric strength
Flame rating UL94 V0 and VW-1
Limiting Oxygen Index greater than 95
ETO and autoclave sterilizable
Mil spec approved (AMS-DTL-23052/12)
FEP/PTFE Dual Shrink Heat Shrinkable Tubing
PTFE heat shrink tubing has a very high continuous use temperature (260°C), and outstanding chemical resistance. Combining this with a lower melt temperature material (FEP) on the inside makes the only high temperature adhesive lined heat shrink tubing on the market. It is available in 2:1 shrink ratio, and meets or exceeds the most stringent commercial (UL VW-1, UL 910, NFPA262) and military standards (AMS-DTL-23053/12).
Features
Continuous operating temperature -454°F to 500°F (-270°C to 260°C)
Outstanding resistance to almost any chemical known (exceptions: alkali metals in molten state, fluorine gas at high temperatures, chlorine trifluoride).
FDA and USP Class VI approved
Very low coefficient of friction
Good dielectric strength
Flame rating UL94 V0 and VW-1
Limiting Oxygen Index greater than 95
ETO and autoclave sterilizable
Mil spec approved (AMS-DTL-23052/12)
1.7: 1 /4: 1 PTFE/FEP Perfect Waterproof Application, Dual Wall
1m PTFE Plastic Heat Shrink Tube Diameter 16mm ~ 40mm FEP F46 1.3
Clearly Transparent Teflon PTFE Shrinkable Tubing Manufacturers
PTFE heat shrink tubing with FEP-DEEM ELECTRONIC&ELECTRIC MATERIAL
Dual Wall Tubing, Flame Retardant Heat Shrinkable Tubes
PTFE-FEP Dual Wall Heat Shrink - APT
PTFE/FEP Dual Wall Heat Shrink Tubing Customized OEM Manufacturer
Using Polymer Components for Aerospace, Commercial, Defense and
PTFE Heat Shrink Tubing 2:1
Comparing Visual Differences Between PTFE and FEP Tubing
Dual Wall and Adhesive Lined heat Shrink Tubing and Tape
Light Wall PTFE non-shrink tubing
FEP Heat Shrinkable Tubing Manufacturers and Suppliers in the USA
FluoroPEELZ™ Peelable Heat Shrink