K4A - Firestik Antenna Stud Mount With SO239 Connector

K4A - Firestik Antenna Stud Mount With SO239 Connector. The FireStik Antenna Company is proud to provide the "World's Best" antenna stud mounts. The Firestik K4 antenna stud is the all-important bridge that links a two-way radio antenna and coaxial cabl
K4A - Firestik Antenna Stud Mount With SO239 Connector The FireStik Antenna Company is proud to provide the World's Best antenna stud mounts. The Firestik K4 antenna stud is the all-important bridge that links a two-way radio antenna and coaxial cable. In fact the stud mount is one of the most basic of CB antenna mount components. Besides linking the antenna to the mount, the stud allows for attaching antenna accessories such as springs and quick disconnects. The antenna stud handles the important task of transmitting signals between the radio transceiver and antenna. An inferior stud can be responsible for unnecessary signal loss. The best prevention for signal loss is to use top quality components in the antenna setup. Firestik stud mounts have earned their reputation for top quality through outstanding design and only using the highest quality components. Heavy duty all stainless steel hardware with nylon insulators ensure long, trouble free service life. FireStik stud mounts are available for three different coaxial cable terminators and sized to fit standard ½ inch mounting holes. The K4 stud is for non-PL259 terminated coax and utilizes ring terminal connectors. The K4A stud has an SO239 connector for use with PL-259 terminated coax. And the K4R stud mount is specifically for use with the Firestik Antenna Company's proprietary Fire-Ring coax termination. CB antenna studs are included with most CB antenna mounts. We sell them separately for customers that have pre-fabricated mounts, L-brackets, or tabs on headache racks with a 1/2 inch hole that still need the stud to mount an antenna. Product features Stainless Steel Stock Nylon (Not Plastic) Insulators Standard 3/8x24 threads Heavy Duty 3/8 Center Shanks Made to be Installed in a 1/2 Hole One year limited warranty Made in the USA!

Firestik K154A Antenna Cowl Mount With K4a for sale online

These mounts are similar to popular 3-way mounts without the clamp. If you know that your installation will not require the clamping bracket that is supplied with the 3-way mounts, you can save a couple of dollars with these mounts. All of these mounts are specifically used for mounting antennas to a flat vertical surface, such as the side of a van or motorhome. These brackets are made heavy-duty stainless steel.

Firestik Ss24a Side Mount w/K-4A Stud

Firestik K4A | 3/8-24 Threaded Antenna Stud Mount | SO-239 Connector, The Firestik K4-A stud mount has been praised by communications professionals

Firestik K4A | 3/8-24 Threaded Antenna Stud Mount With SO239 Connector

CB Antenna Stud MountAttractive mounts for trunk and roof applications. Includes two 21/2in circular discs stainless steel top disc mounting stud and a rubber gasket to protect vehicle finish. The K-4DD model has a low underside profile for confined space installs. Requires a 1/2in hole and flat surface for installation.

Firestik K4add Stainless Steel Disc Mounts

[Connector: SO239 to 3/8 x 24] Standard 3/8 x 24 threads, Fits cb whip antennas with 3/8-24 mounting threads( for TRAM, Fire Stick firefly cb

Universal Heavy Duty CB Antenna SO-239 Stud Mount, Standard 3/8 x 24 Threaded Antenna Stud Mount Adapter

PL-259 CB Antenna Stud Mount - Firestik K4A

The FireStik Antenna Company is proud to provide the World's Best antenna stud mounts.The Firestik K4 antenna stud is the all-important bridge that

K4AX - Firestik K4A Antenna Stud Mount with SO239 Connection- Bulk

FireStik Stud with Screw-On Coaxial Termination for Antenna Mirror Mounts : Electronics

FireStik K-4A Stud with Screw-On Coaxial Termination for Antenna Mirror Mounts : Electronics

Firestik SS274A Hood Channel Mount – CE Showroom

Firestik K4 | 3/8-24 Threaded Antenna Stud Mount with Bolt Lug, The importance of the stud mount cannot be over stressed! The antenna stud mount acts

Firestik K4 | 3/8-24 Threaded Antenna Stud Mount With Bolt Lug

FIRESTIK STUD MOUNT W/SCREWON COAXIAL TE

Firestik Antenna Stud Mount with SO239 Connection

The antenna stud mount acts as a bridge between the antenna and the coaxial feedline. Accordingly, it needs to allow for efficient transfer of your transmitted and received signals to and from the transceiver. If the stud mount doesn't perform that task efficiently you end up with unneeded loss. and if that isn't enough, the stud mount must be strong enough to withstand all of the stress placed upon it from an antenna that is subject to severe wind load and vibration.

Firestik K4 Heavy-Duty Lug Terminal Stud Mount w/SS Hardware

The most popular wire-wound CB antenna in the world. This is the original Firestik design, and a proven performer since 1975. The KW antennas are compatible with autos, trucks, vans, motorcycles and ATV's in a single antenna configuration when metallic ground plane is available. Or, they may be used in dual (co-phased) configuration on any vehicle made from any type of material. Like all CB antennas, the KW antennas require fine-tuning (SWR) in their final mounting location.

Firestik K-4a Stud with Screw-On Coaxial Termination for Antenna Mirror Mounts