RTS-500 Cutter Adapter for Festool Domino DF 700 – Seneca Woodworking

The RTS-500 Cutter Adapter is a precision-machined, hardened steel component that allows mounting any of the Festool Domino DF 500 cutters to the Festool Domino XL DF 700.  This enables the DF 700 to cut smaller mortises that previously could only be done with the DF 500. Any of the standard Domino Cutter bits (4mm/5mm/6mm/8mm/10mm) will work with this adapter.  The RTS-500 Cutter Adapter is sized so that when attached to a DF 500 cutter, the overall length is the same as a DF 700 cutter. This ensures mortises cut with DF 500 cutters on the DF 700 are the same width as they would be if cut with the DF 500.   This also maintains the accuracy of the plunge depth gauge on the DF 700 and simplifies setting mortise depth.  Because of the lower fence travel limit of the Domino XL, the RTS-500

Seneca Woodworking SW-RTS500 Domino Cutter Adapter From DF500 To DF700 - Atlas-Machinery

The Seneca Woodworking Domiplate is a fixed fence solution designed for the Festool Domino DF 500 mortising tool. It allows quick adjustment for accurate and repeatable mortising of 5/8 or 7/8 thick material by turning the plate over. The Domiplate is a fixed fence that eliminates the possibility of fence drift, saving time and money due to misaligned mortises. The Domiplate comes with two captive screws and a textured ball knob for a secure, comfortable grip during use.

Seneca Woodworking SWDP03 Domiplate for 5/8in and 7/8in Thick Material

1/2 Domi-Shim for Festool Domino XL DF 700 – Seneca Woodworking

Seneca Adapter for Domino DF 500 Cutters for DF 700 SWRTS500

Mortise Depth Spacer for Domino XL DF700 – Seneca Woodworking

Seneca Woodworking Small Mortise Kit for Festool Domino XL DF700 – Stockroom Supply Tools

Seneca woodworking, Cutter adapter, Festool Domino

The Seneca Woodworking Domiplate is a fixed fence solution designed for the Festool Domino DF 500 mortising tool. It allows quick adjustment for accurate and repeatable mortising of 5/8 or 7/8 thick material by turning the plate over. The Domiplate is a fixed fence that eliminates the possibility of fence drift, saving time and money due to misaligned mortises. The Domiplate comes with two captive screws and a textured ball knob for a secure, comfortable grip during use.

Seneca Woodworking SWDP03 Domiplate for 5/8in and 7/8in Thick Material

Seneca - RTS-500 Adapter for DF 700 — KJP Select Hardwoods

The RTS-500 Cutter Adapter is a precision machined, hardened steel component that allows mounting any of the Festool Domino DF 500 cutters to the Festool Domino XL DF 700. This enables the DF 700 to cut smaller mortises that previously could only be done with the DF 500. Any of the standard Domino Cutter bits (4mm/5mm/6mm/8mm/10mm) will work with this adapter. The RTS-500 Cutter Adapter is sized so that when attached to a DF 500 cutter, the overall length is the same as a DF 700 cutter.

Seneca Woodworking RTS-500 Cutter Adapter for Festool DF700