Waveshare 2.13inch E-Ink Display HAT V4 Version Compatible with Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/WH/Zero 2W Series Boards 250x122

IMPORTANT: Rev2.1 is the version of the driver board, which is independent of the screen version. Currently, there is only Rev2.1; QC target V3 and V4

Provide online user manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32), please check the manual carefully before using! This is an E-Ink raw

Waveshare 2.13inch E-Ink Raw Display Compatible with Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/WH/Zero 2W Series Boards 250x122 Resolution SPI

E-Paper E-Ink Display 2,9'' 296x128px - SPI - 3 colors - for Raspberry Pi Pico - Waveshare 19607 Botland - Robotic Shop

Waveshare 2.13inch E-Ink display HAT Red/black/white e-paper for Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+ SPI interface - AliExpress

E-Ink display 600x448, 5.83inch HAT for Raspberry Pi, yellow/black/white three-color (WS

waveshare 2.13inch E-Paper Display Module for Raspberry Pi Pico, Black White Two-Color 250x122 Pixel E-Paper Screen LCD SPI Interface Support Partial Refresh Paper-Like Effect Wide Viewing Angle : Electronics

Waveshare E-Ink Display Hat V3.X for Raspberry Pi - 2.13inch - 250x122

Capacitive Touch Display E-paper E-Ink - 2.9'' 296x128px - SPI/I2C - black and white - for Raspberry Pi Pico - Waveshare 20051 Botland - Robotic Shop

Waveshare 1200x825, 9.7-In E-Ink display HAT for Raspberry Pi - RobotShop

2.13 Inch Touch E-Paper HAT 250×122 Display SPI Interface E-Ink for Raspberry Pi Zero 2 W / W / 1.3 Optional ABS Case

E-Paper E-Ink Display 2,9'' 296x128px - SPI - 3 colors - for Raspberry Pi Pico - Waveshare 19607 Botland - Robotic Shop

2.13 capacitive touch e-Paper display, 5-point touch, 250×122 pixels.Display color: black, white. Standard Raspberry Pi 40PIN GPIO extension header,

waveshare 2.13inch Touch e-Paper Display for Raspberry Pi Zero 2 W/Raspberry Pi Zero/Pi Zero W/Pi Zero WH, 250x122 Pixels E-Ink Screen, Paper-Like